<sup><del id="5xpV"></del></sup>

    <button id="5xpV"></button>
    <noframes id="5xpV">
  • <ul id="5xpV"><select id="5xpV"></select></ul>
    <abbr id="5xpV"></abbr>
    <b><address id="5xpV"></address></b>

    IK & IP Testing for Lighting Products

    2025-08-01

    IK & IP Testing for Lighting Products

    Ratings that demonstrate the degree of Impact Protection (IK) and Ingress Protection (IP) are critical for street, roadway and other lighting products. IP ratings are required per IEC/EN 60598-2-3 for all roadway and street applications. IK ratings are required in specific applications when high impact glass provides protection for the enclosed lamp.

    Standards

    IEC 62262 specifies the way enclosures should be tested for IK ratings which are defined as the level of protection the enclosures provided against external mechanical impacts. IEC 60598-1 (IEC 60529) specifies the test method used to classify and rate the degree of protection an enclosure provides against intrusion of various sized solid objects from fingers and hands to fine dust and the protection against water intrusion from falling drops to a high pressure water jet. IEC 60598-2-3 is the International Standard for Luminaires for Road and Street Lighting.

    UL offers complete testing and certification services for street and roadway luminaires to IEC 60598-2-3

    IK ratings are defined as IKXX, where “XX” is a number from 00 to 10 indicating the degrees of protection provided by electrical enclosures (including luminaires) against external mechanical impacts. The IK rating scale identifies the ability of an enclosure to resist impact energy levels measured in joules (J). IEC 62262 specifies how the enclosure must be mounted for testing, the atmospheric conditions required, the quantity and distribution of the test impacts and the impact hammer to be used for each level of IK rating.

    Degrees if protection again external mechanical impacts

    IK00

    IK01

    IK02

    IK03

    IK04

    IK05

    IK06

    IK07

    IK08

    IK09

    IK10

    Non-protected

    0.14J

    0.2J

    0.35J

    0.5J

    0.7J

    1J

    2J

    5J

    10J

    20J

    1.jpg


    IP ratings are defined as IPXX where the first X indicates the degree of protection against solid objects and the second X indicates the degrees of protection against water. A luminaire or lighting component with a rating of IP66 is dust-tight and protected against powerful water jets as described in IEC 60598-1 (IEC 60529).]

    Degrees if protection again solid objects

    IP0X

    Non-protected

    IP1X

    50mm diameter and greater

    IP2X

    12.55mm diameter and greater

    IP3X

    2.5mm diameter and greater

    IP4X

    1.0mm diameter and greater

    IP5X

    Dust-protected

    IP6X

    Dust-tight

    2.jpg


    Degrees if protection again water

    IP0X

    Non-protected

    IP1X

    Vertically falling water drops

    IP2X

    Vertically falling water drops with enclosure tilted

    IP3X

    Spraying water

    IP4X

    Splashing water

    IP5X

    Water jets

    IP6X

    Powerful water jets

    IP7X

    Temporary immersion

    IP8X

    Continuous immersion

    3.jpg


    4.jpg

    For more information or to request a quote, contact BONAD at : Alice@https://szrl02.com

    gvyWNjavascript:void();

    <sup><del id="5xpV"></del></sup>

    <button id="5xpV"></button>
    <noframes id="5xpV">
  • <ul id="5xpV"><select id="5xpV"></select></ul>
    <abbr id="5xpV"></abbr>
    <b><address id="5xpV"></address></b>