簡體中文
English
1. The product contains:
It contains the following materials in each 1000g：
- substances container in a percentage over 1%
- 1°C - 5°C
Methylhydroxyethylcellulose(HEMC) 23.0% 23.2%
sodium chloride - 4.3%
Water(H20) 76.42% 72.5%
- substances container in a percentage less than 1%
sodium chloride(NACL) 0.5% -
6-chloro-m-cresol(PCMX) 0.08% 0.08%
The freezing point is -1℃，the thermal property is equivalent to lean beef.
c. Packaging material is a thin layer of plastic or with appropriate materials which can do medium vapor exchange with the environment.
d. M package means the 500g test package, it equipped with a thermocouple in the geometric center to measure the temperature. The thermocouple contact the package directly, also should make the heat conduction on the outside to reduce to the minimum, the length of the thermocouple is 3.5m.
2. Specification：
Size (mm) | Weight (g) | Size Tolerance | Weight Tolerance |
25 × 50 × 100 | 125 | When the Side length size is 25mm to 50mm, tolerance is allowed to be ± 2mm. 100mm to 200mm, ± 3mm. | ±2% |
50 × 50 × 100 | 250 | ±2% | |
25 × 100 × 100 | 250 | ±2% | |
25 × 100 × 200 | 500 | ±2% | |
50 × 100× 100 | 500 | ±2% | |
50 × 100 × 200 | 1000 | ±2% |
3. The first time after the freezing, the package is not allowed to have the circumstance: swell, bumpy, uneven, deformation, the change of percentage as below ：
size | the change of percentage |
mm | % |
25×50×100 | ±2 |
50×50×100 | |
25×100×100 | |
25×100×200 | |
50×100×200 |
SHENZHEN BONAD INSTRUMENT CO.,LTD, is a high-tech company in China, BONAD quality system has been strictly certified by ISO9001:2015. As a CIE Membership.
Our main products are Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, accessibility test probe and test finger, Glow Wire Test and Needle Flame Test,freezing load test package, soil moisture sensor, all kinds of gauges and so on.
BONAD have gathered lots of experienced researchers and administrators on this field. BONAD products are manufactured strictly in accordance with various EN, IEC, CE, UL, VDE, VS, JIS, ISO, CEE, BS, FMV, GB and other similar international standards. All products can pass CE certificate and authenticated by the third party lab.
Please feel free to contact us if you need any support.
sales Dep:Alice@https://szrl02.com,
Cell/WhatsApp:+8613380391156
